Saturday

Guide to Wetsuit Repair

By Dexter O'Neal


Wetsuit repair is an excellent method to prolong your wetsuits lifespan. In case your wetsuit is just plain old, if it got stiff, pale and hard from all of the sun and UV rays and also the neoprene is beginning to crack there is certainly not much you could to. This form of damage isn't repairable. But if you have ripped your wetsuit on some rocks or wherever, then this may be fixed without difficulties and your wetsuit will likely be as good as new.

Wetsuit repairs are pretty low-priced and they do an awesome job sealing the hole in your wettie. Nevertheless if the hole is little and you do not choose to lose time and/or funds taking it to repair shop you may also repair it by yourself.

What kind of wetsuit hole or tear are you able to repair at home?

The simplest hole to repair is usually a hole that's so small that you just do not need any extra neoprene to cover it up (you can just glue the neoprene back together) and is not much more than an inch (or perhaps two) long. Anything bigger I recommend that you take it to wetsuit repair shop. Also - when the stitches are ripped plus the seams are opening up I also suggest you take it to the repair shop.

Ways to repair your wetsuit?

Things which you will likely have to fix your wetsuit:

Alcohol (for cleaning), Short-bristle brush (1/2" bristles), Neoprene cement (you can find it at most surf shops), Something heavy to weight the repaired area

If you obtain a specific wetsuit repair kit most of these things must be inside. Or you could get a tube of liquid neoprene that is utilized for wetsuit repairs (among other things) and get the rest of the stuff yourself.

Then thoroughly clean the wetsuit as well as the hole of any dirt, wax, salts and so on, Make sure it is dry. Wash it with alcohol and wait until it evaporates. Use the brush to put neoprene cement on all wetsuit surfaces that ought to be sealed back together and wait five minutes, make certain you keep them apart. Repeat the process and leave for 10 minutes. Securely press the surfaces together and apply even pressure, use a book, a rock or something... Wait a number of hours (~6 hours). PS: Be careful not to glue the whole wetsuit together! And wetsuit repair is done.




About the Author:



No comments:

Post a Comment